CreatBot D600 / D600 Pro best quality, affordable price, dual
extruder, large volume, 5 days world wide shipping !
Temperature up to 420°C
We are the first one to publish 420°C high temperature nozzle to 3d
printer market since year of 2016. Now it is the 4th new tech
F430 equiped with dual extruders. The left 260°C-hotend is able to
print with PLA, ABS, PC, Nylon, Carbon fiber,Flexible,etc. The
right 420°C-hotend is made of martensite steel, which is able to
print High performance material like PEEK, ULTEM,etc.
The dual hotend is replaceable, which provide more possibility on
We exclusively research and develop the extruder feeding system
support high-speed printing, and accuracy can reach high to 0.05mm,
it allows to extrude filament steady without block.
Precision up to:0.05mm Speed up to: 200mm/s
The whole-steel body not only ensure the stability when printing
but alst greatly extend the usage period. the optimization and
cooperation of overall structure ensure the sustainable and
efficient operation. The first batch of CreatBot 3D printers have
been working for 5 years and more than 8000 hours.
HUGE BUILD VOLUME
D600 is a real industrial level 3D printer, it can print largest
build volume of 600*600*600mm, 30 times bigger than it of other
ordinary 3D printer in nowadays mass market.
CreatBot D600 build volume: 600*600*600mm
FULLY ENCLOSED CHAMBER
The fully enclosed chamber can block all external interference.
Also this frame can reduce noises, at the same time to provide
constant temperature, so that the model won't deform.
AUTO LEVELING PLATFORM (D600 Pro)
Use of 25 points through the BL-Touch probe to save the level of
platform flatness data at the initial, through the Z axis
intelligent compensation table height in the printing process to
achieve fully automatic leveling.
ACCURATE LINEAR GUIDE RAIL
The accurate linear rail structure can print models in accuracy
high reach to 4~5 times higher than the other ordinary optical axis
printers in mass market. This structure offers accurate filament
feeding, so that can print large model fast and perfectly.
OUTAGE RESTORED & FILAMENT DETECTION
The printer will automatically memorize the current position and
save the print data, lower the working platform and withdraw
filament when the power off suddenly.
The platform surface is attached with the 3D printing special
stickers, and the printer has vertical thermal conductivity so that
can support high thermal efficiency. You can set the parameters to
turn off the hot bed automatically after the specified number of
EASY TOUCH SCREEN
The printer has a 4.3" touch screen, more easy to operate. We also
provide One-Key to preheat, print, home as well as other shortcut
HOT AIR CHAMBER 70°C (D600 Pro)
Hot air chamber can provide constant room temperature so that model
won’t deform when printing.
FILAMENTS DRYING ROOM (D600 Pro)
The function is able to dry filaments like Nylon,PC,ABS, which with
high water absorption, 45°C and 65°C chamber temperature available.
FILAMENT & APPLICATION
We supply high quality CreatBot filament. The models below are
commissioned by the cultural relics protection organization and
printed by D600 with 5kg big roll of PLA within 80 hours. No extra
cares or change filament.
CreatBot D600 Pro TECHNICAL SPECS
|Print Technology:||FDM||Build Volume:||600*600*600mm|
|Number of Nozzles:||Double||Resolution:||0.05mm|
|Layer Resolution:||0.05mm||Filament Diameter:||1.75mm|
|Nozzle Diameter:||0.4mm (0.3, 0.5, 0.6, 0.8, 1.0mm)||Filament Compatibility:||PLA, ABS, Carbon Fiber, Nylon, PC, PTEG, Flexible,etc.|
|Print File Type:||GCO, GCODE||Max. Nozzle Temp.||260°C and 420°C|
|Max. Bed Temperature:||110°C||Max. Chamber Temperature:||70°C|
|Printing speed:||10-200mm/s||Build Plate:||Glass Ceramic Panel|
|Build surface:||Buildtak||Build Plate Leveling:||Automatic|
|Extruder:||Directly Drive||Filament dry room:||45°C and 65°C|
|X Y Positioning Precision:||12.7 Microns||Z Positioning Precision:||1.25 Microns|
|Power Requirements:||100-240V, 50-60Hz||Max. Power:||4000W|
|Screen:||4.3" Touch Screen||Storage Media:||USB Disk|
|SOFTWARE||CreatWare,Simplify 3D,Cura||Supported File Types:||STL, OBJ, AMF|
|Operating Systems:||Windows (7,8,10) Mac OS X||Outage Restored:||Sava data when power is off|
|Product Dimensions & Weight:||915*845*1085mm 125Kg||Packing Size & Weight:||1000*1030*1360mm 190Kg|
Fused Deposition Modeling
Number of Nozzles:
3.0mm (1.75mm optional)
PLA, ABS, Carbon Fiber, Wood, Nylon, PC, PTEG, HIPS, PP, Flexible,
TPU, PVA, etc.
0.4mm (0.3, 0.5, 0.6, 0.8, 1.0mm)
Print File Type:
Ambient Operating Temperature:
Max. Nozzle Temperature:
Max. Bed Temperature:
Max. Chamber Temperature:
70°C D600 Pro
Filaments Drying Temperature:
45°C / 65°C D600 Pro
Best Printing speed:
Max. Printing speed:
Max. traveling speed:
Power-Coated Steel, Aluminum Casting for Motion Components, POM
Tempered glass Panel
Build Plate Leveling:
Factory Leveled, Adjust Manually
Automatic D600 Pro
Geared motor (1:10 rate)
1.8° Step Angle with 1/16 Micro-stepping
X Y Positioning Precision:
Z Positioning Precision:
4000W D600 Pro
4.3" Touch Screen with Multi-language
Supported File Types:
STL, OBJ, AMF
Mac OS X
Sava data when power is off
Pause printing when filament run out
Turn off the power automatically when printing is complete
SIZE & WEIGHT
Product Dimensions & Weight:
Packing Size & Weight:
1000*1030*1360mm 190Kg (Pallet)