Tempered glass Panel Dual Extruder 3D Printer large print volume
Temperature Up to 420°C
D600 and D600 Pro equiped with the 4th generation dual extruders
and hotends. The left extruder equiped with 260°C hotend, it is
able to print with PLA, ABS, PC, Nylon, Carbon fiber, Flexible,
etc. The right extruder 420°C hotend is made of martensite steel,
which is able to print high performance materials. The dual hotend
is replaceable, which provide more possibility on your application.
We exclusively research and develop the extruder feeding system
support high-speed printing, and accuracy can reach high to 0.05mm,
it allows to extrude filament steady without block.
The platform surface is attached with the 3D printing special
stickers, and the printer has vertical thermal conductivity so that
can support high thermal efficiency. You can set the parameters to
turn off the hot bed automatically after the specified number of
1. Hot air chamber can provide constant room temperature so that
model won’t deform when printing.
2. The function is able to dry filaments like Nylon,PC,ABS, which
with high water absorption, 45°C and 65°C chamber temperature
Fully Enclosed Chamber
The fully enclosed chamber can block all external interference.
Also this frame can reduce noises, at the same time to provide
constant temperature, so that the model won't deform
Auto leveling Platform ( D600 Pro)
Use of 25 points through the BL-Touch probe to save the level of
platform flatness data at the initial, through the Z axis
intelligent compensation table height in the printing process to
achieve fully automatic leveling.
Outage Restored & Filament Detection
The printer will automatically memorize the current position and
save the print data, lower the working platform and withdraw
filament when the power off suddenly.
Easy Touch Screen
The printer has a 4.3" touch screen, more easy to operate. We also
provide One-Key to preheat, print, home as well as other shortcut