CreatBot D600 Large 3D Printer with 4.3" Touch Screen
Filament & Application
We supply high quality CreatBot filament. The models below are
commissioned by the cultural relics protection organization and
printed by D600 with 5kg big roll of PLA within 80 hours. No extra
cares or change filament.
Temperature Up to 420°C
D600 and D600 Pro equiped with the 4th generation dual extruders
and hotends. The left extruder equiped with 260°C hotend, it is
able to print with PLA, ABS, PC, Nylon, Carbon fiber, Flexible,
etc. The right extruder 420°C hotend is made of martensite steel,
which is able to print high performance materials. The dual hotend
is replaceable, which provide more possibility on your application.
We exclusively research and develop the extruder feeding system
support high-speed printing, and accuracy can reach high to 0.05mm,
it allows to extrude filament steady without block.
The whole-steel body not only ensure the stability when printing
but alst greatly extend the usage period. the optimization and
cooperation of overall structure ensure the sustainable and
efficient operation. The first batch of CreatBot 3D printers have
been working for 5 years and more than 8000 hours
Huge Build Volume
D600 is a real industrial level 3D printer, it can print largest
build volume of 600*600*600mm, 30 times bigger than it of other
ordinary 3D printer in nowadays mass market.
Auto leveling Platform ( D600 Pro)
Use of 25 points through the BL-Touch probe to save the level of
platform flatness data at the initial, through the Z axis
intelligent compensation table height in the printing process to
achieve fully automatic leveling.
Outage Restored & Filament Detection
The printer will automatically memorize the current position and
save the print data, lower the working platform and withdraw
filament when the power off suddenly.
Easy Touch Screen
The printer has a 4.3" touch screen, more easy to operate. We also
provide One-Key to preheat, print, home as well as other shortcut
The platform surface is attached with the 3D printing special
stickers, and the printer has vertical thermal conductivity so that
can support high thermal efficiency. You can set the parameters to
turn off the hot bed automatically after the specified number of
1. Hot air chamber can provide constant room temperature so that
model won’t deform when printing.
2. The function is able to dry filaments like Nylon,PC,ABS, which
with high water absorption, 45°C and 65°C chamber temperature
Fully Enclosed Chamber
The fully enclosed chamber can block all external interference.
Also this frame can reduce noises, at the same time to provide
constant temperature, so that the model won't deform